Logo

C0078 BMW Fault Code

Check C0078 OBD Fault Code Reason
Description:

The issue covered by the bulletin involves a power steering noise/whine or fluid leak from the power steering pump, gear or high pressure side power steering hose during extreme low outdoor temperature operation.

C0078 Code Symptoms :

See C0078 in engine

There are currently two main types of cylinder deactivation used today, depending on the type of engine. C0078 code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.

Diagnosis And Repairing C0078

C0078 OBD 2 code on vehicles with electronically controlled automatic transmissions, the 3-4 shift solenoid is responsible for actuating the hydraulic circuits to activate clutches or bands that change gears inside the automatic transmission.

How to fix C0078 code ?

See C0078 repair manual
  • Continuous oil flow to the VCT piston chamber
  • Faulty Camshaft Position Sensor
  • Incorrect Positive Crankcase Ventilation (PCV) hose connection
  • Camshaft Position Sensor harness is open or shorted

Some systems require that the actuator has an adequate supply of brake fluid. Low brake fluid levels can mimic the symptoms of code C0078, so consult the manual to locate the brake fluid reservoir.

Bear in mind that a low fluid level can set code C0078 on some applications, so make sure that on fluid operated systems the fluid level is up to the mark before starting an electrical diagnosis.

BMW Cars that meet C0078 error